- Calibrate from 100 to 982°C (212 to 1800°F)
- Portable Rugged Design
- Built in Digital PID Autotune Temperature Controller with Temperature Readout
- NIST Traceable Calibration Certificate Included with Three Data Points
- RS-232 Standard
- Built-in K Type Thermocouple Probe Reference Output
-
- Low Cost, Compact Design for General Purpose Level Monitoring
- Rugged, Shock and Vibration Resistant
- Mounts Vertically at Top or Bottom of Tank
- Reed Switch Design for High Repeatability
- User Selectable, Normally Open or Normally Closed SPST Switch
- Complete Data Acquisition Systems
- Analog and Digital I/O Models Available
- USB Interface
- Modbus® RTU Protocol
- Up to 25 Conversions per Second
- 500 Vrms Analog Input or Analog Output Isolation
- 16-Bit Analog Input Measurement Resolution
- Continuous Self-Calibration; No Adjustments Required
- Programmable Analog Input Digital Filters
- Requires 10 to 30 Vdc Unregulated Supply
- Removable Screw Terminal Plug Connectors Supplied
- APPLICATIONS
- Process Monitoring and Control
- Data Logging to any Host Computer
- Product Testing
- Now with Selectable Engineering Units
- Display Backlighting
- Capture Minimum and Maximum Readings
- Zero with One-Touch
- 316 Stainless Steel Wetted Parts
- ±0.25% Test Gauge Accuracy
- 4 Actuator Entry Positions–Designed with a Rotatable Head
- 316 SS Body and External Fittings
- 3 Pole Contact Blocks
- 3 Conduit Entries
- Industry Standard Fitting: 52 W x 98 L x 40 mm Fixing (2.05 x 3.85 x 1.57")
- Cartridge Heater Sleeve Adaptors
- Heat Transfer and Release Coating
- Unique Space Heater SCB Series
- Connector Body Temperature Ratings: With Ferrite Cores: 120°C (248°F) Without Ferrite Cores: 260°C (500°F)
- Environmentally Friendly Cadmium-Free Liquid Crystal Polymer
- Miniature Probes with Sheath Diameters from .010 to .125 inch
- 6 and 12 inch Lengths
- 304 SS, Inconel and 321 SS Sheaths with Grounded, Ungrounded or Exposed Junctions
- Terminations are Color-Coded and Identified with Calibration Letter Code
- Quick Disconnect Probes Supplied with Mating Connector and Cable Clamp
- Made with Special Limits of Error Material
- Made from Special Limits of Error Material
- 150 mm (6") and 300 mm (12") Lengths in Stock †
- Sheath Diameters from 0.25 mm (0.010") to 3.18 mm (0.125")
- 304SS or Inconel Sheath
- Grounded, Ungrounded or Exposed Junction
- 914 mm (36") PFA-Coated Lead Wires Standard
- Environmentally Friendly Cadium-Free Liquid Crystal PolymerMolded Transition Junction Rated to 260°C (500°F)
- High Accuracy Pneumatic Control 0.1% of Span
- NEMA-4X (IP-65) Enclosure
- 4 to 20 mA Loop Powered
- Conduit or DIN Connector Wiring
- Wall, Panel or Pipe Mounting Standard
- Optional DIN Rail Mounting Kit
- Input/Output Ports on Front and Back
- External Zero and Span Adjustments
- Rebuildable Submersible Electrode Assemblies
- Twist Lock Industrial Electrodes and Adaptors
- Pipe Tees
- Integral 2-Wire 4 to 20 mA Transmitter
- Accurate Differential Measurement
- Eliminates Ground Loop Interference
- Built-In Pre-Amp Supports Up to 914 m (3000') Sensor-to-Analyzer Distance
- 4.6 m (15') Standard Cable Length
- Automatic Temperature Compensation on pH Versions
- Made with Special Limits of Error Material
- Molded Handle Rated to 220°C (425°F)
- Retractable Cable with Superior Memory Expands to 1.5 m (5 Ft.)
- Subminiature Connector for Use with Handheld Thermometers
- 300, 450 and 600 mm (12, 18 and 24") Lengths Standard– Custom Lengths Available
- Companion RTD Probe, Type PR-16
