• omega-lpc-series


  • Coded Magnetic Actuation
  • Wide Sensing at 14 mm with High Tolerance to Misalignment
  • Will Operate with Most Safety Relays
  • Popular European Fitting Suitable for all Industry Applications
  • LED Indication
  • Can be High Pressure Hosed at High Temperature Due to NEMA PW12 (IP69K) Rating
  • High Specification Polyester Housing with Integral Back Plate
  • Up to: PLe ISO13849-1
  • 2 NC 1 NO Circuits–High Switching Life–No Moving Parts
Categories: ,

Product Description

The LPC Series coded non-contact safety switches have been designed to enable the conformance to EN60947-5-3 and be used as directed by ISO12100, ISO14121 and EN60204-1. They have coded magnetic sensing which provides a wide sensing distance and provides a high tolerance to misalignment after sensing. They can be fitted behind stainless steel fittings and can operate from 4 directions even in extreme environments of temperature and moisture. When used in combination with most dual channel safety monitoring relays they can be used to provide up to PLe to ISO13849-1.

LPC Series coded non-contact safety switches are designed to interlock hinged, sliding or removable guard doors. LPC Series switches have been developed for non-contact guard door interlocking in the applications of general factory automation, packaging and some food processing industries.

They are specifically advantageous when:
• Poor guard alignment exists
• Anti tamper sensing is required
• High hygiene requirements exist, e.g. food industry hose down
• Long life is required (no moving or touching parts)
• LED status indication is desirable

Standards: ISO14119, EN60947-5-1, EN60204-1, ISO13849-1, EN62061, UL508
Safety Classification and Reliability Data:
ISO13849-1: Up to PLe Category 4
EN62061: Up to SIL3
PFHd: 8.71 x 10-11
Proof Test Interval (Life): 20 years
MTTFd: 866 years
Safety Channel 1: NC 24 Vdc, 0.2 A max rating
Safety Channel 2: NC 24 Vdc, 0.2 A max rating
Safety Channel 3: NO 24 Vdc, 0.2 A max rating
Minimum Switched Current: 10 Vdc, 1 mA
Dielectric: Withstand 250 Vac
Insulation Resistance: 100 MΩ
Recommended Setting Gap: 5 mm (0.2″)
Switching Distance: Sao 10 mm (0.4″) close
(Target to Target): Sar 20 mm (0.8″) open
Tolerance to Misalignment: 5 mm (0.2″) in any direction from 5 mm (0.2″) setting gap
Switching Frequency: 1.0 Hz maximum
Approach Speed: 200 mm/min to 1000 mm/sec
Body Material: UL approved polyester
Operating Temperature: -25 to 80°C (-13 to 176°F)
Enclosure Protection: NEMA PW12 (IP69K), NEMA 6 (IP67)
Shock Resistance: IEC68-2-27; 11 ms, 30 g
Vibration Resistance: IEC68-2-6; 10 to 55 Hz, 1 mm (0.04″)
Cable Type: PVC 6 or 8 core, 6 mm (0.23″) OD; conductors, 0.25 mm2
Mounting Bolts: 2 x M4; tightening torque, 1.0 Nm
Mounting Position: Any
Dimensions: See diagram on PDF
Weight (of Switch, Actuator and Cable):
325 g (0.72 lb) with 5 m (16.4′) cable;
575 g (1.27 lb) with 10 m (32.8′) cable


There are no reviews yet.

Be the first to review “OMEGA – LPC-SERIES”

Your email address will not be published. Required fields are marked *